Analisis Perubahan Tap Trafo Unit 2 PLTG Payo Selincah untuk Memenuhi Kelayakan Sinkronisasi saat Tegangan Sistem Melebihi 153 kV
DOI:
https://doi.org/10.55606/jutiti.v6i1.6685Keywords:
Gas Turbine Power Plant, Step-Up Transformer, Synchronization, System Voltage, Transformer TapAbstract
Synchronization between power plants and interconnected systems requires matching voltage, frequency, and phase angle parameters. At the Payo Selincah Unit 2 Gas Turbine Power Plant (PLTG), synchronization often encounters issues due to transmission system voltage frequently exceeding 153 kV. This study aims to analyze the need for adjusting the tap position of the 11.5 kV/150 kV step-up transformer to ensure synchronization is still possible even under overvoltage conditions. The methodology includes a literature review, field testing, and TTR (Tap Transformer Ratio) analysis based on voltage readings from the HV (High Voltage) and LV (Low Voltage) sides. The results show that changing from Tap 3 to Tap 2 reduces the LV side voltage from 19.89 kV to 19.42 kV, while the HV side voltage drops from 11.93 kV to 11.65 kV. This reduction ensures that synchronization can still be performed even when the system voltage reaches 155–157 kV. Based on these findings, the study provides technical recommendations for system operators to adjust the tap positions accurately, ensuring reliable synchronization of the power plant with the interconnected system safely and effectively under overvoltage conditions.
Downloads
References
Anisah, S. R. (2018). Analisis perbaikan tegangan ujung pada jaringan tegangan menengah 20 KV Express Trienggadeng daerah kerja PT PLN (Persero) Area Sigli Rayon Meureudu dengan simulasi E-Tap. Panca Budi.
Aryza, S. P. (2025). An optimal effect of overload and unbalanced load on transformer lifetime in 20kV distribution substation. Seaninstitute.
Aryza, S. R. (2025). Studi analisis konsumsi dan prognosa penghematan daya listrik PT PLN IP UP Payo Selincah pada tahun 2023. Seaninstitute.
Barboza, L. V., & Luciano, H. H. (2011). Load tap change transformers: A modeling reminder.
Dirjen Ketenagalistrikan. (2020). Peraturan Direktur Jenderal Ketenagalistrikan No. 555 Tahun 2020 tentang sinkronisasi pembangkit listrik ke sistem. Jakarta.
Eko, M. (2023). Laporan pengujian tap trafo PLTG Payo Selincah unit 2. PLN Indonesia Power UBP Jambi.
Erivianto, D. D. (2020). Sistem konversi energi listrik sebagai energi alternatif untuk kebutuhan rumah tangga. Panca Budi.
Gunawan, H. S. (2024). Design and build a charging battery solar cell using the maximum power point tracker (MPPT) system. Panca Budi.
I. S. 1159. (2019). Recommended practice for monitoring electric power quality. McGraw-Hill.
Machowski, J. B. (2008). Power system dynamics: Stability and control. John Wiley & Sons.
P. J. (Persero). (2010). Instruction manual power transformer 60/80 MVA 115/11.5 kV. UNINDO.
Saadat, H. (2010). Power system analysis (3rd ed.). McGraw-Hill.
Stevenson, W. G. (1994). Power system analysis. McGraw-Hill.
Sutanto, D. (2021). Power system analysis. Andi.
Wibowo, P. A. (2025). Analisis pengaruh penggantian konduktor pada saluran udara tegangan menengah 20kV terhadap drop tegangan di PT. PLN (Persero) UP3 Bangkinang. Panca Budi.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2026 Jurnal Teknik Informatika dan Teknologi Informasi
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
